Decade banks

IET 1413 precision capacity decade

• Capacitance Range: 1 pF to 1.111 11 μF
• Base Accuracy: 0.05%
• Resolution: 6 digits
• Zero-Capacitance: <0.1 pF
• Stability: 100 ppm/year
• TC: <20 ppm/°C
• Rack mounting available
• Front and rear outputs available

IET GenRad 1491 Accurate Induction Decade

• Shielded toroidal cores for low mutual inductance and minimal effect from external field
• Sealed against moisture for long-term stability
• Excellent as a moderately accurate inductance standard
• High Q, 200 and higher

IET High Accurate Capacity Decade

• High accuracy: 0.05%
• Low zero capacitance: <0.1 pF
• Trimmable capacitors for lower decades
• 3-Terminal shielded construction for low values
• 5-Terminal construction for high values
• Excellent stability – 100 ppm/year
• Excellent TC – begins at 20 ppm/°C

IET High Power Resistance Decadence Substitute (HPRS)

• Resistance from 1 mΩ to 10 MΩ
• Wide choice: 3 to 9 decade units
• Accuracy: 0.5% or 1%
• Power Rating : 225 W/decade, 250 W max. or higher

IET Programmable Resistance-Capitance-Inductance-RTD

• Resistance from 1 mΩ/step to 10 MΩ/step
• Resistance Accuracy: ±(0.01% + 15 mΩ) to ±(1% + 70 mΩ)
• Capacitance from 100 pF to 10 μF/step
• Capacitance Accuracy: ±(0.5% + 3 pF) to±(4% + 3 pF)
• Inductance from 1 mH to 1H/step
• Inductance Accuracy ± 2%

IET PRS-300 Precision Programmable Resistance Decade

• Resistance Range: 0.1 Ω to 20 MΩ
• Precision Lab Grade Accuracy 70 ppm + 1 mΩ Resolution: 1 μΩ ( 0.000 001 Ω)
• High reliability relays, rated for 100 Million Switches
• With Built-in PT-100 and PT-1000 Tables, RTD values can be inputted in both °C, °F or Ω
• Programmable Decade Resistor with USB Interface and Labview Drivers

M192 Programmable AC/DC Resistance Load

• Resistance range from 15 Ohm to 300 kOhm
• Maximal load 3kW, maximal voltage 250V RMS
• Frequency range DC to 10kHz
• Accuracy 0.1%
• 2, 4 – wire connection
• Interface RS – 232 (IEEE488 optionally)

M642 Programmable Resistance Decade of Meatest

• Resistance range 100.000 mΩ – 20.0000 MΩ
• Resistance accuracy +/- 200 ppm
• Operating voltage 200 V
• Simulation of RTD temperature sensors
• Simulation accuracy +/- 0.1 °C
• User defined curves (conversion tables)
• RS232 (optionally USB, IEEE488, Ethernet)

Meatest M191 Insulation Tester Calibrator

• Programmable high voltage high resistance decade
•  Resistance range from 10 kΩ to 1 T
• Ω Working voltage range up to 10 kV D
• C Grounded or floating operation
• Built-in three fix value high voltage capacitors from 10 nF to 100 nF
• Built-in monitoring high voltage voltmeter

Meatest M525 Capacity Decade

• Designed for capacitance meters calibration
• Capacitance range 100 pF – 100.00 μF
• Capacitance accuracy 0.25%
• Operating voltage 50 V
• User defined curves (conversion tables)
• RS232 (optionally USB, IEEE488, LAN)

Meatest M550 impedance calibrator

• Resistance standards from 0.1 Ω to 100 MΩ
• Capacitance standards from 10 pF to 100 μF
• Simulated inductance standards from 10 μH to 10 H
• Four pair coaxial terminal connection, four terminal connection, two terminal connection
• Calibration data from 20 Hz to 1 MHz

Meatest M631 RTD simulator decadebank

• Calibration of temperature controllers
• Resistance range 16 Ω – 400 kΩ
• Resistance accuracy +/- 30 ppm
• Temperature coefficient < 1ppm/°C
• Operating voltage 200 V
• Simulation of RTD temperature sensors accuracy ± 0.01 °C
• User defined curves (conversion tables)
• RS232 (optionally USB, IEEE488)

Meatest M632 Programmable Resistance Decade

• Resistance range 1.00000 Ω – 1.20000 M Ω
• Resistance accuracy +/- 30 ppm
• Temperature coefficient < 1ppm/°C
• Operating voltage 200 V
• Simulation of RTD temperature sensors
• Pt simulation accuracy +/- 0.01 °C
• User defined curves (conversion tables)
• RS232 (optionally USB, IEEE488, LAN)

Meatest M194 high resistance decade

• Resistance range 10.00 kΩ – 100.0 GΩ
• Resistance accuracy 0.1 to 1 %
• Operating voltage to 6 kVDC
• Short current mA – meter
• Hot switching
• Timing function
• RS232 (optionally USB, IEEE488, Ethernet)

Meatest M641 programmable RTD simulator

•  Calibration of temperature controllers
•  Resistance range 10.0000 Ω – 300 kΩ
• Simulation accuracy +/- 0.1 °C, resistance accuracy +/- 200 ppm
• Operating voltage 200 V
• Simulation of RTD temperature sensors
• User defined curves (conversion tables)
• RS232 (optionally USB, IEEE488, Ethernet)