Chroma 61800 Regenerative Grid Emulators new models

• 9kW, 12kW en 15kW
• 0-350V, 0-87A/0-96A. 0-105A
• DC, 30-100Hz
• DC output 0-495V
• Regenerative
• Standard USB and LAN

H&H Electronic Single Cell Load

• Loading down to min 0.6 V or even to 0 V (SCL ZV) at
  maximum current
• Basic operating modes CC, CV, CR, CP
• Combined CC+CV, CR+CC+CV, CP+CC+CV, CV+CC
• Adjustable protections for current and undervoltage
• Square, PWM and modulation function
• Test of energy storage devices
• Internal resistance measurement function
• Master-slave operation for parallel connection

H&H QL series bipolar power supplies

• Voltage up to 100 V
• Currents up to 320 A
• 2-quadrant or 4-quadrant design
• DC source-sink
• Additional AC source for 4-quadrant models
• Basic operating modes CC, CV, CP, CR
• Combined operating modes CC+CV, CV+CC

Itech IT7800 high power programmable AC/DC power supplies

• 3kVA to 15kVA , expandable up to 960kVA
• 0 to 350V L/N and 500V L/N 1-phase and 3-phase
• DC output -495V to 495V and -90A to 90A (15kVA)
• DC, 16Hz to 2400Hz
• AC, DC, AC+DC and DC + AC
• Power meter and harmonic analysis/generator IEC 61000-4-13
• Variable output impedance IEC 61000-3-3

Itech IT7900 series regenerative grid emulators

• Regenerative AC power supply
• 16Hz-150Hz
• Regenerative 4-quadrant amplifier
• Anti-Islanding Test Mode with RLC
• AC, DC, AC+DC and DC+AC mode
• 0-350Vl-n
• Max 0-700Vl-l (reverse mode)
• IEC61000-4-11/4-13/4-28
• Constant Voltage/Current limit/Power limit

Itech IT8000 Series Regenerative DC loads

N4L LPA series broadband signal amplifiers

• DC accurate and wide bandwidth (up to 1MHz)
• Switch selectable coupling options: AC, AC+DC or AC with reduced DC
• Switch selectable precision gain settings and selectable bandwidth
• High slew rate
• Stable into wide range of loads
• Isolated to 40V common mode to reject ground loop currents

The HSA series of bipolar amplifiers from NF corporation

• Bipolar amplifier DC-1MHz.
• 0-150Vp-p, 0-300Vp-p in series.
• Versions with 3Ap-p, 6Ap-p and 12Ap-p.
• Amplification up to 50x
• Two inputs

The R&S NGU bi-directional and bipolar DC power supplies

• Bidirectional NGU201: 0V to 20V / -8A to 8A / 60W
• Bipolar NGU401 : -20V to 20V / -8A to 8A / 60W
• 6½ digit DMM with high speed data acquisition 500.000 samples/sec
• Accuracy up to 1uV / 100pA
• Fast load regulation <30us
• Galvanic isolated and floating output

Vitrek 4700 precision high voltage meter

• Direct Input Terminal 10KVDC, 10KVACrms
• Extern probes to 140KVDC, 100KVACrms
• DC accuracy Direct Input 0.03% of reading + 0.03V (10mV)
• AC accuracy Direct Input 0.12% of reading + 0.1V (10mV)
• Functions: DC, True RMS AC, Ripple, Peak to Peak, Crest Factor en Frequency Measurements
• Adjustable up to 60 measurements per sec.
• LAN (Ethernet), RS232/Serial en USB printer port standard. GPIB optional

Vitrek PA910 High precision power meter

Vitrek PA920 High precision power meter

NGL200 Bi-directional Lab Power supplies from R&S

• 0-20V, 0-6A
• Max 60W
• One or two channels
• Bi-directional
• 6½ digit DMM
• USB and Lan interface

Itech IT6000C series bidirectional power supplies

Chroma 62000D Programmable DC Power Supply and Load

• Voltage rating : 0-100V/0-600V/0-1200V/0-1800V
• Power rating : 6kW/12kW/18kW
• Two-quadrant operation: source and load functions
• Easy master/slave parallel & series operation up to 180kW
• Wide range of voltage & current combinations in constant power
• Auto sequencing programming
• Voltage & current slew rate control

Itech IT-M3400 ultra compact bi-directional DC power supplies

• 60V to 600V, 200W to 800W models
• ultra compact design ½ 19″ rack width and 1U height.
• Bi-directional and Regenerative
• 16 units independent control with 1 interface
• Battery test and emulation function with limit settings
• OVP, OCP, OPP and OTP
• USB, CAN, LAN, GPIB and RS232 interface options