Imtech Belgium

Imtech Belgium

In our search for various equipment, we ended up at TT&MS. They were able to offer us power supplies from various manufacturers for our applications. To make our choice, we were very well supported by TT&MS. We were also able to test the devices in advance before we made our purchase. In the period between the order and the delivery, we also had devices at our disposal so that our work would not be delayed. For which we are thankful.

 

Erwin Brenner, Imtech Belgium
Project Manager

dcinergy

“TT&MS has always been ready to provide us with state-of-the-art testing and measuring equipment. Characteristic is that TT&MS offers an extremely good service, as well as extensive support in the specification and selection of the equipment. The employees are technically well versed, a valuable distinguishing factor compared to other players in the market. Moreover, this technical knowledge is accompanied by a constructive, solution-oriented and personal approach.”

 

Giel van den Broeck, dcinergy

Signify Netherlands

Signify Netherlands

“I’ve known the people at TTMS for years. An open and honest relationship has developed in which we can say everything to each other, resulting in a short but powerful communication. This increases efficiency, both for me and for TTMS.
Ever since I developed monitors at Philips, we have been using their video protocol test equipment for our latest protocols. By listening carefully, TTMS and their manufacturers respond to our needs. The mutual benefit is that we get good support and they make better testers.
In my current developments and tests on Signify connected LED lighting systems, we use various power supplies, electronic loads and analyzers. If TTMS has something new that is of interest to me, they know that I am positively critical of it. I’m looking for reliable equipment that is easy to use and TTMS continues to keep an eye out for new possibilities. For many years now, we have had a pleasant cooperation that works both ways. They know the market well and know how to find the right manufacturers for the right equipment.”

 

Han Misdom, Signify Netherlands
https://www.youtube.com/watch?v=iuFZsaGZXXY&rel=0

 

MetricControl

“As an independent calibration laboratory of electrical/electronic temperature and geometric measuring equipment, we and our customers benefit from accurate measurement results and good traceability. This requires good and stable measurement and control equipment. To achieve this, a reliable partner is needed that offers high quality and thinks along with us, and TTMS is such a partner. We have been working in good collaboration with TTMS for many years. Technical problems are challenges for them and questions are answered quickly and adequately. TTMS is pro-active: they always think along with us. They are also customer-oriented, flexible, committed and reliable. They always live up their appointments. Also, they are experts, provide good advice and deliver the right equipment. In short, MetricControl likes to work with TTMS.”

 

Latefa El Amrani, MetricControl

Shell Technology Centre Amsterdam

“In my role within the calibration and quality lab, it is a continuous striving for quality for me. In order to ensure this, the right support from, amongst others, suppliers is essential. TTMS understands this like no other, and I have been doing business with them for years. If I need to describe the business relationship with TTMS, it would be that it’s both constructive and instinctive. The measurement instrumentation is reliable.
In addition to this, TTMS’ expertise of test and measuring equipment complements the STCA.

 

Jan Serné, Shell Technologie Centre Amsterdam

Allied Motion Dordrecht

“I’ve been doing business with TTMS for over 15 years and for the following reason: TTMS stands for more than a delivery of a box – their company name  is TOTAL test and measurement SUPPORT for a reason. They know what is happening in the market and look beyond a catalogue. Questions are never too crazy: their advice with regard to measurement instruments meet the requirements, and the price is attractive as well.

 

Nic Verbruggen, Allied Motion Dordrecht
https://www.alliedmotion.com/corporate-video/

 

Re/genT

“For both our own laboratory and our customers’ test systems, we frequently use power sources supplied by TT&MS. The power sources are used to test the cooling units and compressors on the different power voltages and frequencies. Frequently we get new questions from our customers for different capacities, ranges etc., and that’s when TT&MS advises us on the possible solutions. For example, we often have to deal with short but high starting currents of compressor motors. Should a power source be selected on its maximum rated output only, there would be a good chance of it not being sufficient. We also appreciate the fact that TT&MS regularly brings a power source along for evaluation. All our power sources are controlled via a computer, and TT&MS’ contributes in this area as well. In conclusion, by providing the right advice and complementing our limited knowledge in this area, we always get a effective solution.”

 

Johan Wijnstekers, Re/genT

Hypex Electronics

“I have been doing business with TTMS for years. They offer us good advice, and have a wide range of products to choose from. Before we decide to purchase a product, TTMS allows us to use a demonstration model to experience for a few days whether the product meets our expectations. They think along with us and don’t try to sell me just anything. Should it occur, for whatever reason, that there is a defect in the equipment of TTMS, they will follow up with the required service with regard to repair and, if necessary, a replacement. With its service, TTMS invests in a good and lasting customer relationship.”

 

Joop van Bijnen, Hypex Electronics

Victron Energy

“We don’t buy measuring instruments, we purchase solutions for specific measurement problems. I like to buy from TTMS, given their knowledge of test solutions in power electronics. I hate sellers. TTMS helps us to make the right choice. They even come up with instrumentation from manufacturers they do not represent themselves. And always with the perfect service: they are not complicated and just arrange what is needed.”

 

Hans Verhees, Victron Energy

ABB Power Grids Jumet

“The ABB Power Grids Jumet organisation is an innovative development and production facility of ABB that manufactures active filters and battery energy storage systems to support a stable grid. To test these systems we have acquired two Cinergia GE/EL +120kVA eplus units capable of doing grid emulation (AC + DC), operating as an electronic load (AC +DC) and being a battery emulator. We have experienced very good support from TTMS in obtaining these two Cinergia units. This included organising an on-site demonstration and supplying loan systems prior to the delivery of our final systems. This way we could start testing as early as possible. TTMS also organised training for the operators from the original manufacturer. This support allowed us to introduce the first battery energy storage systems even prior to the full delivery of the Cinergia systems.”

 

Arnold Memelink, ABB

WHAT OUR CUSTOMERS SAY

Arnold Memelink

Arnold Memelink

ABB

"The ABB Power Grids Jumet organisation is an innovative development and production facility of ABB that manufactures active filters and battery energy storage systems to support a stable grid. To test these systems we have acquired two Cinergia GE/EL +120kVA eplus units capable of doing grid emulation (AC + DC), operating as an electronic load (AC +DC) and being a battery emulator. We have experienced very good support from TTMS in obtaining these two Cinergia units. This included organising an on-site demonstration and supplying loan systems prior to the delivery of our final systems. This way we could start testing as early as possible. TTMS also organised training for the operators from the original manufacturer. This support allowed us to introduce the first battery energy storage systems even prior to the full delivery of the Cinergia systems."

University of Luxembourg

Sasan Rafii-Tabrizi

University of Luxembourg

“At the Energy and Environment department of the Faculty of Science, Technology and Medicine (FSTM) of the University of Luxembourg we do have different research projects related to green energy contributing to the development of eco-cities. As a long-standing partner of our research unit, TT&MS has proven that they are able to answer even the most complex questions in a professional manner. They have shown that they are always up to date with the latest technology and do not spare any effort to look at the application and even the situation on site. The exchange of ideas was always very pleasant and took place quickly. We look forward to further years of fruitful cooperation.”

OUR SUPPLIERS

© Copyright 2021 - TTMS B.V. | Privacy Policy | General terms of condition