News

Show all Solutions TTMS Power General Instrumentation Calibration

M631, M641, Real-Resistance RTD Temperature Simulator

Meatest has designed two programmable RTD temperature simulators for the simulation of resistance-based sensors. The Meatest M631 is a high accuracy RTD simulator with a range of 16Ω to 400kΩ. This model has a basic accuracy of 0.01°C, with a resolution of 0.001°C. The decade bank itself consists of highly stable foil resistors, switched by relays resulting in a temperature coefficient of 1 (...)

Introduction of Black Body Sources (Infrared Calibration)

This overview covers dedicated black body sources for low uncertainty calibration of infrared thermometers. A range of portable primary black body sources combines high emissivity with excellent temperature uniformity. The cylindrical design minimises the effects of air movement and environmental changes. Many of the sources can be used with high purity ITS-90 Fixed Point Cells where the thermometer is calibrated (...)

The Magna-Power DBx module turns a switched-mode power supply into a power supply with linear specifications

Magna-Power introduces the optional DBx Module for almost all series of programmable Magna-Power DC power supplies. With the DBx Module, the combined system achieves up to 10x less ripple, 24-bit read-back resolution and less than 5 ppm stability in voltage or current mode control. The Magna-Power DBx Module, guarantees ultra-high stability, low ripple, high precision and high accuracy. Suitable for voltage (...)

Resistance meter for motor windings

The new RMIS resistance meter from Elettrotest can measure the resistance of the windings of a motor driven by a pulse width modulated (PWM) power supply. This can be done on a single-phase motor as well as a three-phase motor with a maximum voltage of 500Vac. SPECIFICATIONS Using the resistance method, the RMIS can directly measure the resistance of the coil windings (...)

The Itech SAS1000 solar panel simulation software

THE ITECH SAS1000 SOLAR PANEL SIMULATION SOFTWARE The Itech SAS1000 solar panel simulation software is an option with selected fast Itech DC power supplies. The combination makes it possible to simulate different types of solar panels under varying light and temperature conditions. In this way, solar inverters can easily be tested for efficiency, maximum power point tracking (MPPT) and also shadow operation. (...)

The first Cinergia GE&EL AC/DC ePlus delivered in the BeNeLux

THE FIRST CINERGIA GE&EL AC/DC EPLUS DELIVERED IN THE BENELUX We now have the first “All-in one” Cinergia GE&EL AC/DC ePlus power supply/load delivered in the BeNeLux. The unit was officially introduced in July 2020 and the University of Luxembourg bought one for their test laboratory because of the versatility of this unit. At the Energy and Environment department of the Faculty of Science, (...)

FCS3000 Fuel Cell Simulation Software

FCS3000 FUEL CELL SIMULATION SOFTWARE The FCS3000 fuel cell simulation software has been designed by Itech to replace real fuel cell systems with a simulation platform. This allows you to efficiently research hybrid propulsion systems and distributed energy without having to actually use the fuel cell and hydrogen. In combination with the Itech IT6000C bi-directional DC power supply or the IT6000B regenerative energy system, this FCS3000 (...)

The IT6000B series bi-directional regenerative power supplies from Itech

THE IT6000B SERIES BI-DIRECTIONAL REGENERATIVE POWER SUPPLIES FROM ITECH Itech proves that the bi-directional DC power supply has finally matured with its new, 2 quadrant, IT6000B series. Itech’s IT6000B series bi-directional regenerative power supplies (unipolar) are actually two devices in one: both a DC power supply and a DC load. The regenerative design also contributes to considerable energy savings. The Itech (...)

AC power supply for production test egg grading machines

TT&MS supplied a customer specific 20kVA AC power supply from Elettrotest for Moba. This is used to generate a stable but adjustable 50Hz and 60Hz AC grid. The applied AC power supply is suitable for an output voltage of 0-150Vrms and 0-300Vrms L-N, and can be used in single and three-phase applications. This special version is equipped with various three-phase connections and is (...)