TTMS Engels

Meatest M191 Insulation Tester Calibrator

Programmable high voltage high resistance decade
Resistance range from 10 kΩ to 1 T
Ω Working voltage range up to 10 kV D
C Grounded or floating operation
Built-in three fix value high voltage capacitors from 10 nF to 100 nF
Built-in monitoring high voltage voltmeter

Meatest M550 impedance calibrator

Resistance standards from 0.1 Ω to 100 MΩ
Capacitance standards from 10 pF to 100 μF
Simulated inductance standards from 10 μH to 10 H
Four pair coaxial terminal connection, four terminal connection, two terminal connection
Calibration data from 20 Hz to 1 MHz

The Meatest M160 Portable Precision DC Calibrator

Portable source of industrial process signals
DC voltage 0 – 100 V, max. burden up to 2.5 W / ± 20 ppm / year
DC current 0 – 50 mA, max. burden up to 2.5 W / ± 50 ppm / year
Resistance 10 Ω – 300 kΩ, resolution from 100 uΩ / ± 200 ppm / year
Temperature TC BEJKNRST with cold junction compensation / RTD ± 0.1°C / year
Frequency 01 Hz – 15 kHz / ± 50 ppm / year
Frequency 01 Hz – 100 kHz / ± 50 ppm / year

The Meatest M505 Process Calibrator – Datalogger M505D

Current output 0-22mA, Source/Sink
Voltage output 0-25V
mV outputs 0-27mV and 0-540 mV
DIN Thermocouples J, K, N, R, S, T, B, E
RTD Simulator -200 … 850ºC
Resistance range up to 3kOhm
Multimeter ±2V to ±200V DC and ±100mA

Meatest M143 and M143i portable multifunction calibrator

Basic Accuracy 70 ppm for DCV
DC/AC voltage up to 1000 V
DC/AC current up to 20 A (2 A with M143i)
Calibration of clamp meters up to 1000 A using Meatest M140-50 Current Coil
Sinusoidal & Non-sinusoidal waveforms
Fixed standard resistors from 10 Ω to 100 MΩ
TC/RTD temperature sensor simulation

De multifunctie kalibratoren welke TTMS in het pakket heeft, zijn van de Europese firma Meatest.

De kalibratoren van Meatest zijn kosteneffectieve oplossingen voor kalibratietoepassingen voor secundaire kalibratielaboratoria, waar deze functioneren als secundaire standaarden voor de kalibratie van het instrumentenbestand.

Ook bij productielijnen van paneelmeters, multimeters, omvormers, meetversterkers, thermometers, etc., worden de Meatest multifunctie kalibratoren ingezet.

De Meatest multifunctie kalibratoren hebben een verscheidenheid aan functies voor het het kalibreren van gelijkspanning, wisselspanning, gelijk- en wisselstroom, weerstand en capaciteit. Voor de kalibratie van RTDs behoort de RTD simulatiefunctie tot de mogelijkheden.

Vanaf basisnauwkeurigheden van 15ppm voor gelijkspanning en wisselspanning vanaf 250 ppm zijn mogelijk: ruim genoeg voor het grootste deel van de instrumentenbestand bij de meeste firma’s. Het voltbereik gaat van 0 to 1000 Volt en stroombereik tot 30 ampère.

De Meatest kalibratoren zijn zowel in geautomatiseerde opstellingen mogelijk middels RS232, als bench applicatie, en ook draagbare oplossingen zijn beschikbaar.

WHAT OUR CUSTOMERS SAY

Arnold Memelink

ABB

"The ABB Power Grids Jumet organisation is an innovative development and production facility of ABB that manufactures active filters and battery energy storage systems to support a stable grid. To test these systems we have acquired two Cinergia GE/EL +120kVA eplus units capable of doing grid emulation (AC + DC), operating as an electronic load (AC +DC) and being a battery emulator. We have experienced very good support from TTMS in obtaining these two Cinergia units. This included organising an on-site demonstration and supplying loan systems prior to the delivery of our final systems. This way we could start testing as early as possible. TTMS also organised training for the operators from the original manufacturer. This support allowed us to introduce the first battery energy storage systems even prior to the full delivery of the Cinergia systems."

Sasan Rafii-Tabrizi

University of Luxembourg

“At the Energy and Environment department of the Faculty of Science, Technology and Medicine (FSTM) of the University of Luxembourg we do have different research projects related to green energy contributing to the development of eco-cities. As a long-standing partner of our research unit, TT&MS has proven that they are able to answer even the most complex questions in a professional manner. They have shown that they are always up to date with the latest technology and do not spare any effort to look at the application and even the situation on site. The exchange of ideas was always very pleasant and took place quickly. We look forward to further years of fruitful cooperation.”

OUR SUPPLIERS

Need advice? Click here

Doelbewust Online Marketing

Multifunction Calibrators

Productfilters

Decade Bank

WHAT OUR CUSTOMERS SAY

OUR SUPPLIERS