Neware CT/CE-4000 Battery Cell Testing Solutions

The Neware CT/CE-4000 series offers a complete line of models for testing battery cells, including button cells, pouch cells, cylindrical cells, and block cells. Each model in the CT/CE-4000 series features 4 current ranges, enabling highly accurate measurements even in the lower current ranges.

For each channel, you can program a charge/discharge cycle with up to 254 independent values. The measured values can be stored in internal memory.
Programming these cycles is extremely easy with the included BTS software. In the software, you can also configure all protection settings, such as maximum charge voltage, maximum discharge voltage, maximum charge current, maximum discharge current, maximum capacity, and optionally maximum temperature.

Available models in the CT/CE‑4000 series

• CT‑4008Q‑5V/100mA
• CT‑4008Q‑5V/6A
• CT‑4008Q‑5V/12A
• CE‑4008Q‑5V/15A
• CE‑4008Q‑5V/20A
• CE‑4008Q‑5V/30A
• CE-4000-20V/10A

Need higher speed or higher current?

If your application requires a higher sampling rate and faster response time, take a look at Neware’s CT-9000 series. It is available in 2-channel and 8-channel configurations.

If, on the other hand, you need a higher current, take a look at the CT/CE-5000 series, with the CE-5012-5V600A as the top model, or the Pro version in the CE-6000 series. Model CE-6006-Pro-6V1200A features a maximum current of 1200A and a minimum pulse width of 10 msec.

However, for the correct configuration of your test setup, we recommend contacting TTMS. TTMS’s technical consultants can best assist you by completing a comprehensive questionnaire, ensuring you receive the most suitable configuration for your application.

Related products

CT/CE-5000 regenerative cell testers
CE-6000 module and pack testers
CT/CE-9000 battery cell testers
Test fixtures
Test climate chambers
BMS test instrumentation (CE-6’S-BMS-24S300A)