Neware CE-6000 Battery Module/Pack Testing Solutions

The Neware CE-6000 series essentially consists of nine models for testing battery modules. However, these systems are configured to customer specifications; this page provides a good overview of the available options. The basic accuracy is 0.02% for voltage and 0.05% for current measurements. The sampling frequency in the CE-6000 series is 10 ms, and measurements are taken with 24-bit resolution.

The number of channels depends on the configuration you require and is listed here as a maximum of 16. If you need more channels, please let us know so we can work with you to configure the right setup for your application. For each channel, you can program a charge/discharge cycle with up to 254 independent values. The measured values can be stored in an internal memory (max 1GB/ch) or, of course, on the PC. Programming these cycles is extremely simple with the included BTS software. In the software, you can also configure all protection settings, such as maximum charge voltage, maximum discharge voltage, maximum charge current, maximum discharge current, maximum capacity, and optionally maximum temperature.

Available models in the CE-6000 series module testing

CE-6000

Available models in the CE-6000 series pack testing

CE-6002-1500V200A
CE-6001n-3000V200A
CE-6002-200V200A EOL

However, for the correct configuration of your test setup, we recommend that you contact TTMS. TTMS’s technical consultants can best assist you by completing a comprehensive questionnaire, ensuring that you receive the most suitable configuration for your application.

Related products

CT/CE-4000 battery cell testers
CT/CE-5000 regenerative cell testers
CT/CE-9000 battery cell testers
Test fixtures
Test climate chambers