Magna-Power MagnaLOAD ALx series DC loads

  • 1,25kW and 20kW units
  • Integrated arbitrary waveform generator
  • Max 600Adc
  • Max 1000Vdc
  • USB, RS485, LXI and GPIB interfaces
  • Sequence mode up to 100 steps
  • User defined analog-digital I/O
Magna-Power MagnaLOAD ALx series DC loads

The Magna-Power MagnaLOAD ALx series DC loads

The Magna-Power MagnaLOAD ALx series DC loads 1.25 kW – 20 kW are available in 27 models. The ALx series has a 16-bit resolution for programming and measuring functions of these DC loads. It is suitable for voltages from 200Vdc to 1000Vdc and currents from 60Adc to 600Adc. Use of these ALx series loads is possible in CV, CC, CR and CR modes and comes in a 19 inch housing with a height of 3U up to 24U.

Arbitrary Waveform Generator of the MagnaLOAD

The integrated Arbitrary Waveform Generator allows the user to freely define load profiles in which the following setpoints can be programmed:

  • Voltage, Current, Power, and Resistance Set Points
  • Time Period
  • Rise and Fall Slew Rates
  • Stop, Loop, or Jump-to-Point Setting
  • Magna-Power programmable DC loads

Magna-Power not only has an impressive line of DC power supplies but also the MagnaLOAD product line with programmable DC loads. The ALx Series, ARx Series, and WRx Series consist of 39 water and air cooled models from 1.25 kW to 120 kW+. They are suitable for voltages of 0-1/000Vdc and 0-1.200Adc. All MagnaLOAD models feature the MagnaLINK™ DSP controller, contributing to impressive functionality. The Magna-Power DC loads are standard equipped with a 25-pin D-Sub connector for external I/O. This connector has 8 Digital Outputs, 4 Digital Inputs, 4 Analog Outputs, 4 Analog Inputs and is user configurable.

The MagnaLOAD ALx series models:

  • ALx1.25 kW
  • ALx2.50 kW
  • ALx5 kW
  • ALx7.5 kW
  • ALx10 kW
  • ALx12.5 kW
  • ALx15 kW
  • ALx17.5 kW
  • ALx20 kW

Related products

H&H PLI-MR, Multi-Range DC loads

Need advice? Get in touch