Neware CT/CE-5000 Battery Cell / Battery Module Testing Solutions
- 5V and 20V models with 10A, 30A and 600A current capability
- Each model does have 4 current ranges
- Accuracy 0.02% to 0.05% depending on model
- Sample frequency 10mSec
- Regenerative technology
- Optional temperature recording
The Neware CT/CE-5000 series consists of three models for testing battery cells and battery modules. Each model features four current ranges, enabling highly accurate measurements, even at lower current levels. The sampling frequency in the CT/CE-5000 series is higher than in the CT/CE-4000 series, making these units more suitable for measuring the dynamic behavior of the battery cell or module. Thanks to the regenerative design of these units, they are ideal for endurance testing, resulting in significant savings on energy costs.
The number of channels depends on the configuration you require. For each channel, you can program a charge/discharge cycle with up to 254 independent values. The measured values can be stored in internal memory (max 1GB/ch) or, of course, on the PC. Programming these cycles is extremely simple using the included BTS software. The software also allows you to configure all protection settings, such as maximum charge voltage, maximum discharge voltage, maximum charge current, maximum discharge current, maximum capacity, and optionally maximum temperature.
Available models in the CE-5000 series
CE-5008Q-20V/30A
CE-5012-5V/600A
CE-5040-20V/10A
If you need a higher sampling rate and current response time for your application, take a look at Neware’s CT-9000 series. This series is available in 2-channel and 8-channel configurations. We also have a model in the CE-6000 series. Model CE-6006-Pro-6V1200A with a maximum current of 1200A and a minimum pulse width of 10 msec.
In the CT/CE-4000 series, the model selection is even more extensive; please see our separate product page for CT/CE-4000 battery cell test solutions. However, for the correct configuration of your test setup, we recommend contacting TTMS. TTMS’s technical consultants can best assist you by completing a comprehensive questionnaire, ensuring you receive the most suitable configuration for your application.
Related products
CT/CE-4000 Battery Cell Testers
CE-6000 module and pack testers
CT/CE-9000 battery cell testers
Test fixtures
Test climate chambers
BMS test instrumentation (CE-6’S-BMS-24S300A)
