Neware CT/CE-9000 Battery Cell Testing Solutions

The Neware CT/CE-9000 series consists of three models for testing battery cells. The sampling frequency in the CT/CE-9000 series is 1 msec, making these units suitable for measuring the rapid dynamic behavior of the battery cell. Each model has 4 current ranges, enabling extremely accurate measurements, even in the lower current ranges.

The number of channels depends on the configuration you require. For each channel, you can program a charge/discharge cycle with up to 254 independent values. The measured values can be stored in internal memory (max 1 GB/ch) or, of course, on a PC.

Programming these cycles is extremely simple with the included BTS software. In the software, you can also configure all protection settings, such as maximum charge voltage, maximum discharge voltage, maximum charge current, maximum discharge current, maximum capacity, and optionally maximum temperature.

The available models in the CE-9000 series:

CT-9000-5V15A
CT-9002-5V6A
CT-9008-5V300mA

If you do not require the high dynamic range of the 9000 series, please also consider the CT/CE-5000 series or the CE/CT-4000 series.

However, for the correct configuration of your test setup, we recommend contacting TTMS. TTMS’s technical consultants can best assist you by completing a comprehensive questionnaire, ensuring you receive the most suitable configuration for your application.

Related products

CT/CE-4000 battery cell testers
CT/CE-5000 regenerative cell testers
CE-6000 module and pack testers
CT/CE-9000 battery cell testers
Test fixtures
Test climate chambers
BMS test instrumentation (CE-6’S-BMS-24S300A)