Itech IT9100 Digital Power Meter
- 4.3-inch color LCD (TFT)
- Input range: 1000 Vrms / 50 Arms
- Harmonic components
- The accuracy of voltage and current measurement is up to 0.1%
- The voltage, current, power, harmonics and other parameters can be measured at the same time
- The power meter has a function of harmonic measurement, and can be used for measuring up to 50th harmonics *1
- Standard built-in USB, RS232 and Ethernet communication interfaces
The Itech IT9100 Power meter is suitable for single phase applications, and is rated for a maximum voltage up to 1000 Vrms. The current input is gespect at 50 Arms with a bandwidth of 100 kHz. The IT9100 can be easily used to measure voltage, current, power, frequency, harmonics and other parameters. The standard configuration includes USB, RS232 and LAN communication interfaces as well as interfaces for USB-based peripherals. Users can store the measured parameters in an external USB Stick. The basic accuracy of voltage and current is 0.1%. Application is seen particularly in low-power, 50/60Hz setups such as home appliances. The IT9100 series is equipped with a 4.3-inch TFT LCD color display with high resolution and provide user with clear real-time values.
Oscilloscope function
The oscilloscope function of the IT9100 series power meter allows users to directly observe display fluctuations of voltage, current and power trends when testing the performance of household appliances, and can set display trends, waveforms, values and histograms. Users can directly capture the waveform and record the value without an external oscilloscope via an external USB storage interface.
Harmonic Measurement
The IT9121 power meter has a bandwidth of 100KHz, which allows high-speed harmonic measurements to be achieved within a wider dynamic range. In harmonic mode, the voltage, current, active power, reactive power and phase of each harmonic and the total harmonic distortion (THD) factor can be tested.
