Itech IT-M3100 Ultra Compact Wide range DC power supplies

  • 0-20V, 30V, 80V, 150V, 300V and 600V
  • 400W and 850W models
  • Compact, ½ 19" rack width and 1U height
  • Constant Power Supply
  • LIST mode up to 100 steps per sequence
  • OVP, OCP, OPP and OTP security
  • USB, CAN, LAN, GPIB and RS232 interface options
Itech IT-M3100 Ultra Compacte Wide range DC power supplies

Itech’s IT-M3100 ultra compact DC power supplies come in a very compact housing of ½ 19″ rack width and 1U height. The different IT-M3100 models are available in voltage ranges from 0 to 20V, 30V, 80V, 150V, 300V and 600V at 400W and 850W capacities. If higher powers are required, up to 4 units can be connected in parallel in a Master-Slave configuration. This without affecting the excellent performance for rise time and accuracy. The multi-channel power design of the IT-M3100 makes it possible to control 16 units independently with a single interface. The modular design with side ventilation makes it easy to stack these DC power supplies.

CONSTANT POWER PRINCIPLE

Due to the constant power principle, the IT-M3100 can be used over a wide range while maintaining maximum power. At low voltages the full current range is available. But also high voltages are possible at a reduced current range. This makes the unit suitable for a wide range of applications.
The IT-M3100 series power supplies are OVP, OCP, OPP and OTP protected.
Optional interfaces such as RS232, RS485, CAN, LAN, USB_TMC and VCP are available. Most communication protocols are supported, including CANOPEN, SCPI and LXI.

BATTERY TESTING

For safe battery testing with the IT-M3100 it is possible to set limits on voltage, current, capacity and charging time. If these limits are exceeded, stop the power supply with its charging cycle. Using the software, the voltage, charging time and capacity of the battery can be monitored.

The units are easily programmable and have a LIST mode to program sequences of up to 100 different steps. With the TRACE FUNCTION, the graphical display of voltage and current can be monitored in real time.

All this in a compact housing makes this power supply extremely suitable for space-saving installation in automatic test systems for multi-channel testing, but it can also be perfectly used as a stackable tabletop model on test benches.

If you have any questions about prices and/or delivery times of one of the Itech IT-M3100 series DC power supplies please contact us. We will gladly advise you in choosing the best power supply for your application.

Models IT-M3100 series

An overview of the different versions can be found below.

Model Voltage Current Power
IT-M3110 20V 100A 400W
IT-M3120 20V 100A 850W
IT-M3111 30V 70A 400W
IT-M3121 30V 70A 850W
IT-M3112 80V 22A 400W
IT-M3122 80V 22A 850W
IT-M3113 150V 12A 400W
IT-M3123 150V 12A 850W
IT-M3114 300V 6A 400W
IT-M3124 300V 6A 850W
IT-M3115 600V 3A 400W
IT-M3125 600V 3A 850W

Related products

R&S NGP800 series 2 and 4 channel DC power supplies

Itech IT6000D series High power supplies

Itech IT-M3900D compact high power DC power supplies

Need advice? Get in touch