The Itech IT6600C regenerative bi-directional DC power supply

Itech introduces the IT6600C series of regenerative bi-directional DC power supplies. A new generation of bi-directional DC power supplies from Itech that uses advanced third-generation SiC technology.

A 3U high unit from the Itech 6600C series has two independent channels of 21kW each. These two independent channels can be connected either in series or in parallel, creating one unit with a maximum power of 42kW. Unique in terms of power density in a 19-inch 3U high enclosure. Simultaneously, this also creates an extremely flexible unit in terms of maximum voltage and current. Over a voltage range of 210V to 1200V, we can use it at full power. By connecting units in parallel, we get up to 420kW in one 19-inch rack and by connecting these racks in parallel, we get up to 10MW in one system.

An important new feature in the IT6600 series is the redundancy function. In a multi-unit setup (N+1, N+2…), when a unit fails, the IT6600C system will automatically switch on the redundant unit to guarantee the output power of the whole system.

The IT6600C series is not only a power supply, but also an excellent electronic load. It can not only provide power as a DC power supply, but also act as a regenerative DC load (CC, CR and CP). And given its two independent channels, you can even work with one DC power supply channel and one regenerative load of 21kW each in one 3U enclosure.

The beautiful touch screen display ensures extremely easy operation. As standard, the IT6600 series models are also equipped with a USB, LAN and Canbus interface. Optionally, a GPIB, EtherCAT and Analog&RS232 interface is also available.

For more information on the IT6600C, please refer to the datasheet.

Back to the overview