Programmable AC/DC resistive load

Meatest has launched programmable AC/DC loads. The models can load up to 3000 watts at up to 250Vrms. This at an accuracy of 0.1% over a frequency range of DC to 10 kHz. The load has 2- and 4-wire connection options.

Two versions are available:
– Model M-192 has a resistance range of 15Ω- 4700Ω and is made up of 60 physical resistors.
– Model M-192A has a range of 15Ω-300kΩ with a resolution of 1mohm to 1kohm.
As standard, these programmable resistor loads are equipped with an RS232 interface (optional IEEE-488 interface).

This programmable AC/DC load is suitable for testing voltage sources, current sources, transformers and almost all applications where a programmable resistive load is required.

Thanks to its good specifications, this AC/DC load is also at home in calibration laboratories, in production environments, service centres and development environments.

For detailed specifications, see  Meatest M-192.

Back to the overview