Multi-Channel electronic load fromH&H: the PMLI series

A multi-channel electronic load up to 12 channels in one mainframe, max 1800W
There is often a need to use multiple electronic loads simultaneously. This can be to test a multi-channel power supply (think PC power supplies) or for burn-in applications, for example.

With the new PMLI series, H&H now has an ideal solution for such tests where up to 12 electronic loads can be combined in a compact enclosure. If this is not sufficient, it is possible to couple 1 master frame with up to 8 slave frames.

Specifications
It is a complete modular system that can be fully built up to your own requirements, with individual load modules between 150W and 600W and voltages between 60V and 240V DC. Up to 1800W can be built together in 1 frame. To save costs and space, there are no buttons or dispay on the unit itself. They are fully controllable and readable via software. The unit is equipped with an RS-232 interface, but can also be optionally equipped with an Ethernet interface.

It is possible to connect 3 load modules in parallel in order to test higher powers as well.

The PMLI multichannel electronic load can operate in the classic mode: Constant Current, Constant Voltage, Constant Resistance, Constant Power and a Dynamic mode with 2 preset values.

If you are looking for an affordable multiload, with the H&H PMLI multichannel electronic load you have a golden tool in your hands with numerous possibilities to successfully perform your test application as well.

For detailed information about the PMLI series, please refer to the datasheet.

Back to the overview