News

Show all Solutions TTMS Power General Instrumentation Calibration

Isotech Copper Point SPRT

SPRT probe up to 1100 degrees Celcius For years, the temperature calibration world has run into the problem of accurately measuring temperature at higher values. The ITS-90 specifies the SPRT to the freezing point of silver, 961.78°C. Thermocouples can be used at this temperature but it is difficult to detect small changes. For example, for a Type R thermocouple, the (...)

Meatest M525 Programmable Capacity Decade Bank

The M525 is specially designed for capacitance range calibration of multimeters and LCR meters. This decade bank has a range of 100pF to 100uF at a basic accuracy of 0.25%. The maximum operating voltage is 50V. Besides being used in the calibration or quality laboratory, this decade bank is also excellent for use in automated measurement setups where remote control (...)

Isotech MicroK 100 en 200

Accurate temperature measurement is now made very easy for you. Isothermal Technology Limited (Isotech) has extended the MicroK series with two new models. In addition to the 800 and 400, there are now the 200 and 100µ°C absolute accuracy models. The MicroK is the world's only precision temperature gauge suitable for measurements with platinum resistance thermometers (PRTs), thermocouples and thermistors. (...)

Isotech’s new handheld temperature gauge, the TTi-10

Isothermal Technology Limited (Isotech) has long been known as a supplier of highly accurate temperature measuring devices. These include in particular laboratory models such as the microK, the milliK the TTi-22 and the TTi-7. Now Isotech introduces the new handheld temperature gauge the TTi-10. This is a dual-channel temperature gauge that uses Standard Platinum Resistance temperature probes. With this, the (...)

MilliK precision thermometer from Isotech

The arrival of the milliK precision temperature gauge from Isothermal Technology Limited (Isotech) completes the range of microK thermometers with a model suitable for standard temperature calibrations with accuracies of up to ±8 ppm (PRTs). The design of the milliK is based on that of the microK. The milliK is suitable for measurements with platinum resistance thermometers (PRTs), thermocouples, thermistors (...)

Introduction of Ohm-Labs in Benelux

Ohm-Labs precision resistors and current shunts. TTMS has recently expanded its product range to include Ohm-Labs' calibration resistors and current shunts. Ohm-Labs is an American manufacturer that started producing wire-wound precision resistors in 1970. The current range consists of precision standard resistors and current shunts for calibration laboratories. There is a complete range of oil and air resistors from 10µΩ (...)

Meatest, 3 phase power / energy calibrator

MEATEST has launched a new, compact, 3-phase power/energy calibrator with the model M-133C. The M-133C offers up to 30 amps per phase. The voltage range is from 0 to 280 Vrms. The phase angle between voltage and current can range from 0 to 360 degrees. The phase between different voltages and currents is also separately adjustable. Voltage and current are (...)

Programmable AC/DC resistive load

Meatest has launched programmable AC/DC loads. The models can load up to 3000 watts at up to 250Vrms. This at an accuracy of 0.1% over a frequency range of DC to 10 kHz. The load has 2- and 4-wire connection options. Two versions are available: - Model M-192 has a resistance range of 15Ω- 4700Ω and is made up of (...)

TTI-22 temperature meter from Isotech

Isotech has launched a new high-precision temperature meter with an unmatched price/performance ratio. The measurement accuracy is 0.001°C and this unit has a resolution of 0.0001°C. This makes the TTI-22 extremely suitable as a reference standard in comparative temperature sensor calibrations. The unit has two input channels. Both standard 100ohm PRTs and 25.5 and 100Ohm SPRTs are supported. Reference values (...)