TTMS Engels

Chroma 19020 Multi-Channel Hipot Tester

10/4 channels in one design
10 sets of sync output and measurement
3 in 1 (AC/DC/IR Test)

Chroma 19036 Wound Component EST Analyzer

Layer short and Hipot Test for motor
5 in 1 ACW/DCW/IR/IWT/DCR analyzer scanner
Hi-pot 5kVac / 6kVdc High Speed Contact Check
5kV Insulation Resistance test (IR)
Impulse Winding Test high sampling rate (200MHz)

Chroma 1911 High Capacitance Electrolytic Capacitor ATS

Test parameter LC/C/D
Test 8 electrolytic capacitors
Constant current for test leakage current

Chroma 19200 Electrical Safety Test Scanner

Support Electrical Safety Test
Support High / Low voltage circuit insulation
Max.8 units for multiple scanners

Chroma 8900 Electrical Equipment Automatic Test System

Open architecture software
Expandable hardware

The 19032P Electrical Safety Analyzer from Chroma

– 500VA Power Rating
– Five instruments in one
– Twin-PortTM function (Patent)
– Programmable output voltage to 5kV AC and 6kV DC
– Insulation resistance to 50GΩ/1000V DC
– Ground bond up to 30A (Option up to 40A / 60A)

The Chroma 9102 Hipot Calibrator

AC/DC/IR/DCR Test
8 Channel Scanner
5kV Insulation Resistance test
High speed contact check

Vitrek V7x series safety testers

Color touch LCD screen
AC Hipot 10-5000Vrms
DC Hipot 20-5000V
Insulation resistance up to 450Gigohm
Groundbond : 1-30A
Low resistance : 0-60kOhm
Digital I/O, USB, RS232

Chroma 19050 and 19070 Hipot Tester

3 in 1 (AC/DC/IR Test)
8 / 4 channels scanner versions

Chroma 19055 Hipot Analyzer

CORONA discharge analyzer for motor
Hipot test ACW 5kV/100mA, DCW 6kV/25mA
Insulation Resistance test 5kVmax, 1MΩ~50GΩ
500VA output
Floating output complies with EN50191

19056/19057 Hipot Analyzers from Chroma

Up to10kVac / 20kVdc
Provides high withstand voltage analysis

Vitrek 95x safety testers

AC Hipot up to 10 kV
DC Hipot up to 15 kV
Current 50mA(AC), 30mA(DC)
Optional current up to 200mA(AC)
Optional 40A ground bond
4 wire ohm meter
IR up to 4T ohm
pA leakage current measurement

Chroma 19572 Ground Bond Tester

High current ground continuity testing up to 45Amps
Resistance measurements from 0.1mΩ up to 510mΩ
Compatible with the 19070 series Hi-pot Tester

Chroma 19035 Wound Component EST Scanner

4 in 1 (AC/DC/IR/DCR Test)
8 Channel Scanner
5kV Insulation Resistance test
High speed contact check

Chroma 19301A Impulsing Winding Tester

Wide range inductance test application(0.1uH~100uH
IWTest high sampling rate(200MHz)
Contact check & test voltage compensation by measured inductance.
B.D.V function(BreakDown Voltage test)

Chroma 8910 Medical Electrical Safety ATS

Support electrical safety test and function test scanning
Support customize function test (option)
Open architecture software

Safety testers, or hipot testers, are used to carry out all your safety testing in a fast, efficient, and accurate manner. With safety testing, we mean AC / DC high voltage tests, insulation resistance, ground bound, and leakage current tests.

In addition, these devices are equipped with features such as OSC (open / short check), ARC detection (decisive test), and of course detection systems to ensure your own safety.

The high-voltage test can be performed to a voltage of 20kV.
The insulation resistance that can be measured ranges from 0.1 M to 50 G ohms.
The ground bound test that serves to testing of the quality of the earth connection, may range up to 60A.
Finally, the leakage current of a device can be tested at 300V up to 20A.

Besides a single test, these devices are fully programmable, which allows for the execution of an entire sequence of various tests. Therefore, they are extremely suitable for use in R & D environment, as well as automated production environments. There are several interface options, such as RS-232 and GPIB.

These units can be equipped with a multiplexer, in case a single connection does not suffice. This allows for the connection of up to 16 channels simultaneously, so as to carry out measurements in a rapid and simple manner, using multiple terminals.

Chroma offers the most advanced devices with its Hipot testers product line, enabling you to guarantee the safety of your products to your customers.

Below an overview of the different models, in the following order: Safety Testers, Hipot & Safety Testers, Ground Bond Testers, and Systems:

WHAT OUR CUSTOMERS SAY

Arnold Memelink

ABB

"The ABB Power Grids Jumet organisation is an innovative development and production facility of ABB that manufactures active filters and battery energy storage systems to support a stable grid. To test these systems we have acquired two Cinergia GE/EL +120kVA eplus units capable of doing grid emulation (AC + DC), operating as an electronic load (AC +DC) and being a battery emulator. We have experienced very good support from TTMS in obtaining these two Cinergia units. This included organising an on-site demonstration and supplying loan systems prior to the delivery of our final systems. This way we could start testing as early as possible. TTMS also organised training for the operators from the original manufacturer. This support allowed us to introduce the first battery energy storage systems even prior to the full delivery of the Cinergia systems."

Sasan Rafii-Tabrizi

University of Luxembourg

“At the Energy and Environment department of the Faculty of Science, Technology and Medicine (FSTM) of the University of Luxembourg we do have different research projects related to green energy contributing to the development of eco-cities. As a long-standing partner of our research unit, TT&MS has proven that they are able to answer even the most complex questions in a professional manner. They have shown that they are always up to date with the latest technology and do not spare any effort to look at the application and even the situation on site. The exchange of ideas was always very pleasant and took place quickly. We look forward to further years of fruitful cooperation.”

OUR SUPPLIERS

Need advice? Click here

Doelbewust Online Marketing

Safety testers

Productfilters

WHAT OUR CUSTOMERS SAY

OUR SUPPLIERS