Isotech Hyperion 4936 series liquid baths

Isotech Hyperion 4936 series liquid baths

The Isotech Hyperion 4936 has a large calibration volume of 65mm x 160mm deep, making them ideal for use as portable liquid baths. Stirring liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid baths have smaller calibration uncertainties than dry blocks. But in combination with a suitable reference thermometer, accuracies of up to 0.005 °C can be achieved.

The Isotech Hyperion 4936 models are part of the award-winning Isocal-6 family. With a reference probe in combination with various accessories for dry block, infrared, surface calibration and even ITS-90 fixed point cells, uncertainties up to 0.001°C can be achieved.

In dry block mode, the large 65mm diameter block allows the calibration of large probes or the calibration of many sensors simultaneously. As a liquid bath, the sensors can be placed directly into the stirred liquid. This eliminates the need for special pierced blocks.

When the liquid is used directly in the block, the model with only the controller, or the Basic model, is sufficient. Instead of using liquids directly in the block, liquid containers can also be used to quickly change liquids.

For greater accuracy, a separate reference thermometer should be used to compensate for the alternating off-set between the controller and the accessory temperature. This also applies to the use of a liquid container, dry block insert, blackbody target or the surface Sensor Kit.

Other solutions may include

Isotech TTI-10
Isotech milliK precision thermometer
Model 935-14-16 Semi standard platinum resistance thermometer can be.