Elettrotest HPS three-phase AC power supplies series

Elettrotest HPS series three-phase AC power supplies

Elettrotest HPS series three-phase AC power supplies consists of 4 models increasing in power from 60kVA to 200kVA.

There are two voltage ranges: 0-150V and 0-300V. The frequency range is from 10Hz to 80Hz. The output of the HPS series can be switched from three-phase to single-phase.

These AC power supplies have a standard RS-232 interface. A GPIB/RS485 or LAN interface is also optionally available.

A Labview driver is available if you want to use this AC power supply in an automated environment. The power supplies are protected against short circuits, overloads and excessive temperatures.

Do you also need a power analyser for your application? TTMS also carries an extensive range of power meters.

All models in the Elettrotest HPS series also have a inrush current possibility of up to 2x the rated current. And for three seconds. This is particularly interesting for applications with high inrush currents. Examples are capacitive or inductive loads such as compressors, motors and hydraulic pumps etc., where the initial current is often significantly higher than the rated current. The inrush capacity can be increased up to 360 kVA!

The input and output are insulated in the HPS series 3-phase AC power supplies of Elettrotest.

The HPS three-phase AC power supplies model series consists of:

• HPS 60KVA/90KVAGE
• HPS 100KVA
• HPS 60KVA/180KVA (100KVA)
• HPS 120KVA/360KVA (200KVA (200KVA)

We also carry Elettrotest TPS and CPS series three-phase AC power supplies for the slightly lower power ratings.