The TPS series three-phase AC power supplies

The Elettrotest TPS series three-phase AC power supplies consist of a complete series of 6 models in the power range from 10kVA to 90kVA. The names of the different models differs considerably in this range and this has to do with the possibility of switching between inrush mode and continuous mode. For example, the low-power units make it possible to supply up to 3x the rated current as inrush current for a maximum of 3 seconds. For applications with inductive and capacitive loads, this is a major advantage over traditional AC power supplies. Consider, for example, controlling motors, compressors and high power switch mode power supplies, where the initial current is often significantly higher than the rated current.

There are two voltage ranges: 0-150V and 0-300V. The frequency range is from 10 to 80Hz. With the majority of 3-phase AC power supplies in the TPS series, the output is switchable from 3-phase to 1-phase.
These AC power supplies have an RS-232 interface as standard. Optionally a GPIB/RS485 or LAN interface is available.
A Labview driver is available if you want to use this AC power supply in an automated environment. The power supplies are protected against short circuit, overload and too high temperature.

With the TPS series three-phase AC power supplies from Elettrotest, the input and output are isolated from each other.

The TPS 3-phase model series consists of:

There are two voltage ranges: 0-150V and 0-300V. There is a frequency range from 10 to 80Hz. With a majority of the 3-phase AC power supplies in the TPS series, the output can be switched from 3-phase to 1-phase.
Standard these AC power supplies come with a RS-232 interface. A GPIB/RS485 or LAN interface is also optionally available.
A Labview driver is available if you want to use this AC power supply in an automated environment. The power supplies are protected against short circuits, overloads and excessive temperatures.

In the Elettrotest’ TPS three phase AC power supplies series, the input and output are isolated from each other.

The TPS 3-phase model series consists of:

  • TPS/T 7.5K22.5S (10 kVA)
  • TPS/T 15K45S (20 kVA)
  • TPS/T 30K60S (40 kVA)
  • TPS/T 60K (72 kVA)
  • TPS/T 50K 120S (72 kVA)
  • TPS/T 90K (90 kVA)

 

Are you looking for a power analyser for your application as well? TTMS also carries an extensive range of power meters.

Open the datasheet for detailed specifications of this product.

Open datasheet Quotation request