Home » Products » Chroma 61500 series single-phase AC power supplies
The Chroma 61500 series single-phase AC power supplies range from 500 VA to more than 90 kVA in the high power single and three phase units. The directly coupled output stage makes it possible to generate DC and AC+DC output voltages in these units as well as AC. The frequency is adjustable from 15 Hz to 1 kHz. The output voltage is divided over two ranges; 0-150 Vrms and 0-300 Vrms. In DC mode this means 0-212 Vdc or 0-424 Vdc. The maximum current doubles in the low voltage range. Due to the high crest factor, the unit can also be used in combination with capacitive loads with short high peak currents.
There is also a possibility to set a slew rate for the voltage and frequency for specific tests. All Chroma AC power supplies have a separate measuring function for U, I, Hz, W, VA, VAR and PF.
Do you need a power analyser for your application? TTMS also has an extensive range of power meters. Using a master/slave configuration, a three-phase network can also be created with these ac power supplies.
Characteristic for the Chroma 61500 series is the ability to consciously simulate disturbances. This can be voltage dips of a certain percentage for a certain duration, as well as sinuses with a certain harmonic distortion. For small amplitudes this increases to frequencies of 2400Hz. This makes this series of AC power supplies also suitable for pre-compliance tests for Harmonics according to IEC 61000-3-2, Flicker according to IEC 61000-3-3, and immunity tests according to IEC 61000-4-13/-4-14/-4-28. The output impedance of the 61500 series is adjustable.
Through an optional digital interface (RS232 + GPIB or USB + LAN) and the free soft panel software, the unit is controllable and readable. Labview drivers are also available if you want to integrate the unit in your own test setup.
In addition, there are 3000VA, 4500VA and 6000kVA models that can work both single-phase and three-phase. (3x 1000VA, 3x 1500VA or 3x 2000VA) For detailed information please refer to the datasheet of the 61507, 61508 and 61509.
For the heavier (12kVA to 90kVA) single and three-phase models please refer to the 61511 and 61512 units with master slave options.
Open the datasheet for detailed specifications of this product.
Related products:
+31 252 - 621 080 info@ttms.nl
Arnold Memelink
ABB
"The ABB Power Grids Jumet organisation is an innovative development and production facility of ABB that manufactures active filters and battery energy storage systems to support a stable grid. To test these systems we have acquired two Cinergia GE/EL +120kVA eplus units capable of doing grid emulation (AC + DC), operating as an electronic load (AC +DC) and being a battery emulator. We have experienced very good support from TTMS in obtaining these two Cinergia units. This included organising an on-site demonstration and supplying loan systems prior to the delivery of our final systems. This way we could start testing as early as possible. TTMS also organised training for the operators from the original manufacturer. This support allowed us to introduce the first battery energy storage systems even prior to the full delivery of the Cinergia systems."
Sasan Rafii-Tabrizi
University of Luxembourg
“At the Energy and Environment department of the Faculty of Science, Technology and Medicine (FSTM) of the University of Luxembourg we do have different research projects related to green energy contributing to the development of eco-cities. As a long-standing partner of our research unit, TT&MS has proven that they are able to answer even the most complex questions in a professional manner. They have shown that they are always up to date with the latest technology and do not spare any effort to look at the application and even the situation on site. The exchange of ideas was always very pleasant and took place quickly. We look forward to further years of fruitful cooperation.”
© Copyright 2023 - TTMS B.V. | Privacy Policy | General terms of condition
Doelbewust Online Marketing