Itech IT7800 high power programmable AC/DC power supplies

Power test solutions provider Itech has released a distinctive line of programmable, high power, AC/DC power supplies with the IT7800 series. The Itech IT7800 programmable AC/DC power supplies deliver up to 15 kVA in a housing only 3U high. This at a voltage range of 0-350V L-N. The intuitive touch screen ensures smooth operation. The Itech IT7800 also has a built-in power meter and waveform generator with which harmonic distortion can be programmed in addition to various waveforms. By connecting units in a Master-Slave parallel set-up this makes configurations possible up to 960kVA.

A special feature of the Itech IT7800 is that it has 4 output modes. Besides the AC, DC and AC + DC modes, the DC+AC mode is also available. Thus, an AC grid + DC offset and a DC grid + AC ripple can be generated. This is possible for both 1- and 3-phase applications. With the striking new “reverse phase” function, the standard 350Vac is doubled to 700Vac.

The STEP, LIST and PULSE modes make the Itech IT7800 series suitable for simulating changing AC and DC grids. This includes for example short term PQ events. The analysis and simulation up to the 50th harmonic and the programmable output impedance makes the Itech IT7800 suitable for many applications including standard IEC tests. Remote control is possible via the standard USB/CAN/LAN and digital I/O interfaces.

For more information, please refer to the productpage, the datasheet or contact one of our consultants.

Back to the overview